Large Flow Rate Stainless Steel Air Filters for Air Compressors

The leading Manufacturer in China over 26 Years

The YUKA 16 bar stainless steel air filters are designed to remove liquid aerosols, water, oil and sub-micron particles in the compressed air system. The filtration efficiency can be 99.99% to remove 0.01 micron particles and small droplets, improve the pass rate of the product, reduce maintenance time and costs, increase productivity and reduce production costs ultimately.

There are fifteen models with air ports from 1/2” to DN250 ” pipe connections with various flow rates available. The stainless steel structure can handle most corrosive environments and higher-demand applications, such as military ships, food beverages, electronics and chemical industries etc.

Stainless Steel Air Filters Features:

- The filter housing is tested by a variety of different technologies to ensure the good function and quality of the product to ensure safe and stable operation at all times.

- Both the housing and the filter element support orifice mesh are made of stainless steel to ensure excellent performance and reliability.

- The filter uses high-efficiency fiber glass and felt-like media, which can filter dry and wet dust, particles, oil suspended matter and water droplets to meet the requirements for delivered air quality shown in all editions of ISO8573-1, the international standard for compressed air quality.

- Filter element is secured by a tie-rod to ensure the element is held in place, even with pressure pulsations commonly experienced with piston compressors.

- 15-years warranty on the filter housing.

Product Selection

Below flow rates of compressed air are calculated in rated working pressure of 7 bar (100 psi g) with reference  to 20 ℃.

Correction Factor

To correctly select a water separator model, the flow rate of water separator must be adjusted for the minimum operating (inlet) pressure at the point of installation. 

Calculate the adjust capacity:

1.Minimum filtration Capacity = Compressed Air Flow Rate x pressure correction factor rate.

2.Using the minimum filtration capacity, select an water separator model from the flow rate tables above ( water separator selected must have a flow rate equal to or greater than the minimum filtration capacity).