YD145 5 Micron Particulate Air Filter for Sandblasting Equipment

YD145 5 Micron Particulate Air Filter for Sandblasting Equipment

YUKA's YD145 Particulate Air Filter designed for Sandblasting Equipment to reduce pollutants in air lines, the filter will remove water vapor and particles down to 0.5 micron, port size 1-1/2", max.working pressure 16 bar.

Compressed air is an important power source for sandblaster equipment, when air is compressed, dust, oil and particulates reduce air quality and can significantly affect the system efficiency, including the performance and life of the end-use equipment and products.To maintain a sandblasting machine's overall function, the elements must remain dry. If water or moisture enters the blast machine, it can humidify the blast media and cause it to flow inconsistently or not at all. Water or oil that reaches the surface being blasted can also interfere with coating adhesion. To avoid any potential setbacks caused by moisture in the machine, cyclone water separator and air line filter are suggested to install as a preventative.

YD145 Particulate Air Filter Function

- Remove dust, aerosols and oil vapors out of compressed air.

- Protect downstream equipment against the pollutants.

- Supply dry, clean compressed air to directly contact with end-point products.

- Reducing the energy consumption, total cost of ownership and adding to your satisfaction.

YD145 Particulate Air Filter Features

- Filter housings and elements designed to suit almost industrial applications.

- Filtration grade PF effectively removes particles down to 5 micron.

- YD145 1-1/2 inch air filter housings manufactured from aluminum alloys

- Electrophoretically treated to extend the air filter housing life by up to fifteen years.

- A 1000 hours neutral salt spray test for corrosion resistance to ISO 9227:2006, burst pressure test for a 5:1 safety factor.

- Equipped with a differential pressure gauge, a sight glass and an internal auto drain and manual drain valve.

- Complies with ISO8573-1 air quality requirements. 

YD145 Particulate Air Filter Applications

- Paint spraying.

- Color sorter for agriculture.

- Sandblasting machines.

- Nitrogen and oxygen generation station.

- Chemical manufacturing.

- Pharmaceutical air/gas filtration and product transfer.

- Laser metal cutting.

- Food and beverages.

- Filtration of air in aseptic packaging.

- Filtration of compressed air of other inert gases.

- Manufacture of plastics (PET).

Product Selection

Below flow rates of compressed air are calculated in rated working pressure of 7 bar (100 psi g) with reference  to 20 ℃.

Correction Factor

To correctly select an air filter model, the flow rate of the air filter must be adjusted for the minimum operating (inlet) pressure at the point of installation. 

Calculate the adjust  filtration capacity:

1.Minimum Filtration Capacity = Compressed Air Flow Rate x pressure correction factor rate.

2.Using the minimum filtration capacity, select an air filter model from the flow rate tables above (air filter selected must have a flow rate equal to or greater than the minimum filtration capacity).