WS100 1-1/2 inch Air Compressor Water Separator 10.0 m³/min

YUKA WS100 1-1/2 inch Air Compressor Water Separator 10.0 m³/min  for Water Removal

Bulk liquid in the compressed air system causes pipeline corrosion, damages valves, air cylinders, and tools; reduces the efficiency of after-air coolers and heat exchangers. Over 99% of bulk water can be easily and economically removed by installing our air compressor water separator for water removal. 

WS100 Water Separator Features

- Static rotary vane

- Designed without a filter element

- For the removal of bulk condensed water and liquid oil

- Keep 99.9% high efficiency separation

- Used to protect the pre-filter of refrigerated and adsorption air dryers from bulk liquid contamination.

- Reduce pipe-rusting conditions from water and the damages to valves, cylinders

- High liquid removal efficiencies at all flow conditions

- Can be installed in any position of a compressed air system

- Lower operational and maintenance costs

- Tested in accordance with ISO8573-9

- Improve the air quality.

Product Selection

Below flow rates of compressed air are calculated in rated working pressure of 7 bar (100 psi g) with reference  to 20 ℃

Correction Factor

To correctly select an air filter model, the flow rate of the air filter must be adjusted for the minimum operating (inlet) pressure at the point of installation. 

Calculate the adjust  filtration capacity:

1.Minimum Filtration Capacity = Compressed Air Flow Rate x pressure correction factor rate.

2.Using the minimum filtration capacity, select an air filter model from the flow rate tables above (air filter selected must have a flow rate equal to or greater than the minimum filtration capacity).