YFB030 3/4 inch 1.8 m³/min Economic Fine Air Filter for Air Compressors

YFB030 PF/AO/AA/AX/ACS/AR/AAR 3/4 inch Economic Fine Air Filter

Your Economic air filter supplier in China

YFB030 3/4" fine air filter with filter element suited for Kaeser/Atlas Copco/Ingersoll Rand/Sullair/CP/BOGE/Kobelco/FS/Elgi brand air compressors. Designed with air flow rate 1.8 m³/min removing dirt, water, and oil at a very high efficiency up to 99.99% for 0.01 micron particles and droplets protecting your equipment and delicate instruments from dirt, water, and oil usually found in compressed air. 

YFB030 Economic Fine Air Filter Function

- Remove dust, aerosols and oil vapors out of compressed air.

- Protect downstream equipment against the pollutants.

- Supply dry, clean compressed air to directly contact with end-point products.

- Reducing the energy consumption, total cost of ownership and adding to your satisfaction.

YFB030 Economic Fine Air Filter Features

- YFB030 air filter housings and elements designed to suit almost industrial applications.

- HV borosilicate glass microfiber media repels oil and water for enhanced coalescing performance that effectively removes particles down to 0.01 micron.

- Air filter housings manufactured from aluminum alloys through die casting technology, safety promised.

- Electrophoretically treated to extend the air filter housing life by up to fifteen years.

- A 1000 hours neutral salt spray test for corrosion resistance to ISO 9227:2006, burst pressure test for a 5:1 safety factor.

- Complies with ISO8573-1 air quality requirements.

YFB030 Economic Fine Air Filter Applications

- Paint spraying.

- Color sorter for agriculture.

- Sandblasting machines.

- Nitrogen and oxygen generation station.

- Chemical manufacturing.

- Pharmaceutical air/gas filtration and product transfer.

- Laser metal cutting.

- Food and beverages.

- Filtration of air in aseptic packaging.

- Filtration of compressed air of other inert gases.

Product Selection

Below flow rates of compressed air are calculated in rated working pressure of 7 bar (100 psi g) with reference  to 20 ℃

Correction Factor

To correctly select an air filter model, the flow rate of the air filter must be adjusted for the minimum operating (inlet) pressure at the point of installation. 

Calculate the adjust  filtration capacity:

1.Minimum Filtration Capacity = Compressed Air Flow Rate x pressure correction factor rate.

2.Using the minimum filtration capacity, select an air filter model from the flow rate tables above (air filter selected must have a flow rate equal to or greater than the minimum filtration capacity).