DT009 10.6 SCFM Aluminum Compressed Air Filters

YUKA DT009 1/4 inch Aluminum Air Filters for Oil Removal

YUKA manufactures a comprehensive range of compressed air filtration products for use in almost every industrial environment. Within our DT Series range of threaded filters, we offers 14 models with connections from ¼” to 2-1/2” and flow capacities up to 19.0 m³/min. Air filter housings are manufactured in cast aluminum alloy and operate at 16 bar. They are electrophoretically treated to extend the air filter housing lifetime up to 15 years under rated working conditions. The air filter element is made from oleophobic borosilicate media and a custom engineered anti-re-entrainment layer that guarantees exceptional dirt holding and drainage that effectively removes pollutant meeting the air quality requirements of all ISO8573-1 versions. A unique end cap design allows the elements to fully engage with the filter bowl to prevent vibration without a tie-rod, improve stability and assist drainage and save installation space.

DT009 1/4 inch Air Filter Features

- Small air port design.

- Compact, modular design for quick and easy installation.

- Seven filtration grades available, particle removal down to 0.01 micron.

- Maximum remaining oil aerosol down to 0.001 mg/m³ at 20°C.

- Reliable and efficient removal of liquid and solid contaminants.

- Advanced airflow design for optimum performance and reduced pressure drops.

- External powder coated surface for enhanced abrasion and corrosion resistance.

- A safety and leakage test was conducted on each air filter.

- Automatic drain with manual override for testing and depressurization.

- Suited with a differential pressure indicator or gauge, sight glass and floating ball auto drain to facilitate efficient condensate draining. 

Product Selection

Below flow rates of compressed air are calculated in rated working pressure of 7 bar (100 psi g) with reference  to 20 ℃.

Correction Factor

To correctly select an air filter model, the flow rate of the air filter must be adjusted for the minimum operating (inlet) pressure at the point of installation. 

Calculate the adjust  filtration capacity:

1.Minimum Filtration Capacity = Compressed Air Flow Rate x pressure correction factor rate.

2.Using the minimum filtration capacity, select an air filter model from the flow rate tables above (air filter selected must have a flow rate equal to or greater than the minimum filtration capacity).

Contact HSAIR Today

Do you have a question about compressed air dryers, particulate and coalescing air filters, water separators, automatic drains, service or our website?  Please drop us an e-mail at sales@hsfiltration.com, HSAIR representative will be in touch with you shortly.