WS1000F Gas Water Separator with Flange 60.0 m³/min

WS1000F Gas Water Separator with Flange 60.0 m³/min

Protecting Air Dryers and Air Filters from Bulk Liquid

Bulk liquid in the compressed air system causes pipeline corrosion, damages valves, air cylinders, and tools; reduces the efficiency of after-air coolers and heat exchangers. Over 99% of bulk water can be easily and economically removed by installing our gas water separator for water removal. 

WS1000F Gas Water Separator Features:

- Static rotary vane

- Designed without a filter element

- For the removal of bulk condensed water and liquid oil

- Keep 99.9% high efficiency separation

- Used to protect the pre-filter of refrigerated and adsorption air dryers from bulk liquid contamination.

- Reduce pipe-rusting conditions from water and the damages to valves, cylinders

- High liquid removal efficiencies at all flow conditions

- Can be installed in any position of a compressed air system

- Lower operational and maintenance costs

- Tested in accordance with ISO8573-9

- Improve the air quality.

Product Selection

Below flow rates of compressed air are calculated in rated working pressure of 7 bar (100 psi g) with reference  to 20 ℃.

Correction Factor

To correctly select a water separator model, the flow rate of water separator must be adjusted for the minimum operating (inlet) pressure at the point of installation. 

Calculate the adjust capacity:

1.Minimum Separation Capacity = Compressed Air Flow Rate x pressure correction factor rate.

2.Using the minimum filtration capacity, select a water separator model from the flow rate tables above ( water separator selected must have a flow rate equal to or greater than the minimum separation capacity).

Contact HSAIR Today

Do you have a question about compressed air dryers, particulate and coalescing air filters, water separators, automatic drains, service or our website?  Please drop us an e-mail at sales@hsfiltration.com, HSAIR representative will be in touch with you shortly.